Loading...!
Home Inspections

Is Your Heating and Air Conditioning System Working For You?

Heating and air conditioning clocks the highest ratings on our bills. And it’s a basic thing that we should be doing a checking whether it is working for our advantage. Looking at some basic components would let you know if you are getting the best out your own system.

Check for leaks, it’s the basic. Leaks and wall gaps can spike your bill without you knowing it. Start checking for drafts. Also, see you ceiling. This can sometimes give you a question why your bills are at its highest while you are making your effort to save. Sealing gaps and leaks would deliver wonders.

Whenever possible, set your thermostat at minimum. This can save you some bucks. Heating you water doesn’t need to be at boiling point, its plain useless. A little above the normal temperature, around 39-40 degrees Celsius, is hot enough for anyone.

Check your appliances before and after the purchase. Just before you consider buying an air-conditioners or heaters, stick with your needs. You don’t need to use a horsepower worth of energy when you can easily cool you room with half of that. Same thing with heaters, it’s simply a waste of money buying that extra power. And during your appliances’ service life, check them regularly. Normal wear and tear can take its toll on it. Look for clogs. Dirt can accumulate over time which can diminish the overall performance.

If you’ll be changing appliances, look for those that come with automatic control. This can adjust with your surroundings and will lower down its operation after it reaches your specified setting without you dealing it yourself. This is important to effectively lessen additional power usage.

As much as possible, keep your appliances at low temperature. That is, you should be making some effort in minimizing the heat from appliances. Heat can diminish performance as well. One way to go around this is to have a lower setting and turning it off when not really needed.

Dealing with heating and air-conditioning can be tricky. There are lots of things to check to maximize each drop of power. But in the end, it’s all worth your time.

Editor's choice